Caratbody – Patent Micro Beads of Cross-linked Hyaluronic Acid
HA concentration：20 mg/ml
Ingredient：Sodium Hyaluronate Gel
Volume：10ml x 1
Area of use：Breasts
and buttocks
augmentation
Injection area：Deep dermis, subcutaneous tissue
shallow
Storage Condition： Store at room temperature
Avoid direct
sunlight.
Do not store
with freezing.
Shelf Life：36
months
Patent 3 Staged Microbeads
Hyaluronic Acid Cross-linked Technology（Patented MCL* technology）
This
product is a sterilized product with gel-type, no toxicity by building bridge
hyaluronic acid which is extracted from microorganisms.
This
bridged hyaluronic acid is provided embedding in a disposable syringe, and must
be injected into 1 patient only, and should not be dispensed and injected into
2 persons. The packaging quantity or capacity of the product is specified on
outside the packaging box.
This
product is a disposable sterile medical device, autoclaving (121 ° C, 18
minutes) and should not be reused.
Companies of conventional fillers
that claim to have created a long-lasting HA filler tell us that they have
achieved in raising the cross-linking rate. However, most products have only
raised concentration and particle size due to limitations in the cross-linking
technology. This does not contribute to longevity of the product. Moreover,
products that merely increase concentration results in a product that is not
easily moldable.
Caratbody
applies
the patented 3 staged microbead processing technology that allows to increase
the viscosity and produce a long-lasting filler. By controlling the
cross-linking rate to adjust the viscosity, we are able to
produce a wide range of high quality
fillers depending on its use.
Viscosity
Caratbody
applies the unique technology of creating a semi-solid
state
gel of Hyaluronic Acid. Our product has high cohesiveness and viscosity so when
injected it creates a pseudo capsule as an implant form that it is not easily
dissolved through natural hyaluronidase by the body (mechanism of long-lasting
effect).
Longevity
Increased concentration / Increased particle size
Semi-solid Gel type Caratbody
Removable
Caratbody has overcome the problems
faced by increasing the cross-linking rate, to create a safe and removable
product
You don’t have to worry about unsatisfactory results
after injection. Caratbody is strong
against natural hyaluronidase inside the body, but can be
completely removed by injecting hyaluronidase. Then the filler left in the soft
tissue can be completely removed. It is easily removed.
High hydrophilic capacity
Our product provides excellent volume effect through its high hydrophillic
capacity
and stable molecular structure even after high cross-linking rate
Instruction for use & manipulation
sequence
content of the product.
out the syringe.
capacity in the syringe, and check if any distortion, crack, or damage of the
appearance.
needle syringe which is fit to the position to be injected and open the cap of
the syringe, and connect the needle of syringe.
dermis.
the syringe due to the selection of user.
25G 13mm injection needle (with 0.4mm if internal diameter) is recommended in
case of the product that does not enclosed a needle.
that the bevel of the end of needle should face upward, the shape of the needle
can be seen from underneath the skin as the depth of the injection. meanwhile
the silhouette of needle under the skin cannot be seen clearly and once the
syringe is in place, slowly inject Beads Max™ while insert the needle into the
skin as next, withdraw the needle at the same angle as insertion, do not push
the plunger during the needle is withdrawn from the skin, to prevent caratbody leaking
from the needle point.
To
achieve the desired result, the injection should be into the deep dermis. If
the injection is too deep or inner layer of the muscle, the hyaluronic acid
will be degrades
rapidly, causing the duration time to be shortened. If the injection is too
light may result in bluish discoloration of the skin or bulging.
recommended to use 16~18G Cannula (Semi-permanent cannula). Insert cannula into
the fat layer, then using a controlled shake and turning motion to breaks up
the fat tissues and allowing the fat layer to make space before injection.
*For breast augmentation, injection should be
done at the top part of breast. Do not inject from the bottom part of the
breast, otherwise ptosis or sagging may occur.
Contraindication
diseases, allergies, inflammation or other similar diseases.
with other instruments.
chemical peel procedure, dermabrasion, or other surgical methods.
lactation.
or diagnosed of self-immune disease.
to hyaluronic acid.
tendency to develop into hypertrophic scar.
diseases are in progress or where dermatitis (pimples, herpes & etc.)
hypersensitivity to lidocaine or amide type local anesthetic.
Reseñas
There are no reviews yet.